4ft Rabbit Hutch + 4ft Downstairs Run

We specialise in bespoke rabbit hutch designs – we can make any hutch to your own design with a run any length you want. Just ask!

£259.90

Treatment Options *

Treatment Options (what are these?)

Optional Extras

Product Add-Ons (what are these?)

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

This must be a number!

Product Description

The hutch is illustrated in our standard preservative (non pressure treated).

Key Features

  • Spacious rabbit hutch for a medium sized pet
  • Gable roof with waterproof membrane
  • Removable internal dividers
  • Separate sleeping and feeding areas
  • Predator proof
  • Hand built in UK

Dimensions (approx.)

  • Hutch:
  • H 630mm (25″)
  • W 815mm (32″)
  • D 1220mm (48″)
  • Run:
  • H 460mm (18”)
  • W 815mm (32”)
  • L 1220mm (48”) (72”) & (96”)

For smaller/medium size breeds such as Netherland Dwarf, Angora, Lionhead, Mini Plush Lop etc. This mid sized hutch is made from Redwood and has an exterior grade hardwood ply base panel.

The roof is boarded with the same shiplap as the hutch and is constructed on the same principle as the traditional roof on a domestic house. Beneath the boarding is a polypropylene twin skin rigid membrane with an air gap to ensure warmth and a watertight construction. The roof also has a 3” (75mm) overhang to all sides which is not included in the measurements below.

The hutch is constructed from Swedish Redwood and is cladded on the outside with 12mm shiplap. The door frame is made out of a substantial 18mm x 46mm section and comes with one solid boarded door on the left and a wire door on the right. The hutch is separated internally at the middle point providing the rear half the hutch as a well sheltered sleeping and the front for feeding. The partition is removable within seconds and this will allow you to clean the entire hutch with ease.

Within the front half on the right side there is a pop hole created in the floor of the hutch to allow your pet access the attached run below. The run is screwed permanently to the underside of the hutch.

The hutch doors come with black turn buttons but can be upgraded to spring loaded catches as well as the turn button.

This hutch is made entirely in The United Kingdom by us and is not sold by any other company in the UK.

The size of run can vary to your preference in terms of length. The options are 4ft 6ft and 8ft as standard lengths Please contact us if you have any bespoke requirements as we are able to accommodate this during the construction stage.

This is a superior quality and well-constructed hutch offering 17.5 cubic feet of living space and between 26 and 52 cubic feet of outdoor space depending on which run length you choose. The 6ft and 8ft runs will come with removable wire lids to give you easier access to this part of the run.


Add-On Options

Sliding Door Kit can be fitted to the upper floor so as to block off access to the ramp. E.g. when closed you can confine you bunny upstairs or downstairs.

A Hinged Rabbit Hutch Roof Kit can be added at the rear so that it will open and close like a lid. It has a bonnet like stay to keep it up, and a hasp and staple at the front so you can lock the rabbit hutch roof closed!

Winterising Panels can be fitted to cover any wire mesh opening. The panels simply clip on and when fitted will keep out inclement or winter weather. The panels provide extra warmth of a night time and also maximum security for your pets.

Spring Loaded Catches can be fitted both doors. These are additional to the Turn Buttons.

Materials


Part Details
Roof/Hutch Clad Swedish Redwood
Run/Frames Swedish/Russian Redwood
Plywood Bases & Doors Exterior grade
Nails Galvanized
Screws Zinc plated/Black Japan
Preservative Teak water based (non toxic)
Hinges/Turn buttons Black Japan

Pressure Treatment Options

For maximum protection, we can tanalise your product (a form of pressure treatment) to help give you up to 10 years without the worry from dry rot and normal decay typical to all outdoor wooden furniture. Click here to find out more.

Maintenance

All our products are finished with a Teak water based (non toxic) preservative. The timber should be re-coated with an equivalent preservative every year to ensure the maximum life span of the product.

Oil based coatings are the best as they tend to repel water before it penetrates the timber fibers.

Re-coating is best undertaken on a warm dry day or even better after a dry spell when the timber has had time to dry enough to absorb the coating you are applying.

Additional Protection

Here’s a bit of a tip – get yourself an atomizer spray!

Get yourself an atomizer spray – the sort you do your indoor plant leaves with. Most DIY shops sell what’s called a waterproofing agent. Thompson’s Water seal is a brand name but “B&Q” do their own brand.

Fill the atomizer with it and spray over the external surfaces of the product a couple of times a year. It’s really quick and easy. Don’t forget to wear appropriate mask and gloves. Follow the Health and safety instructions on the container.

Additional Information

Internal Hutch Dimensions 1220 × 814 × 613 mm
Rabbit Breed

, , , , , , , , ,

We do not use couriers to deliver our products as we believe in a total service from construction to meeting our customers face to face. There is a delivery charge of £18.50 per total order whether your order is 1 or 100 items (applies to UK mainland only – certain areas will incur an additional fee). This payment includes assembly and a final silicone treatment after your product is completed, for additional protection against the elements.

Please note the optional tantalizing process may delay your expected delivery date.