£0.00
We specialise in bespoke rabbit hutch designs – we can make any hutch to your own design with a run any length you want. Just ask!
We can upgrade the rabbit hutch run to any length you want. Just ask!
This 4ft Rabbit Hutch + 8ft Downstairs Run (Illustration shows the hutch on a 10ft run) is for medium breeds such as French Lops etc. This 4ft large hutch is made from Redwood and has an exterior graded hardwood ply base panel.
This illustration shows the optional Winter Centre Panel
The roof is boarded with the same shiplap as the hutch and is constructed on the same principle as the traditional roof on a domestic house. Beneath the boarding is a breathable water proof membrane to ensure a watertight construction. The roof also has a 3” (75mm) overhang to all sides.
The hutch is constructed from Swedish Redwood and is cladded on the outside with 12mm shiplap. The door frame is made out of a substantial 34mm x 46mm section and comes with one smaller solid boarded door on the left and a large wire door on the right. The left hand side of the hutch is designated as the sleeping area and there is an internal divider that can easily be removed in seconds to allow you to clean the entire hutch throughout.
The boarded door comes with a black tower bolt as well as a turn button for added security. The wire door comes with a spring loaded catch and a turn button as standard but e can also add a Hasp & Staple as well. The hutch sits on a run which is wired on the inside so as to stop chewing of the frames. There is a doorway at the end of the run as to allow your pet access to the garden.
This hutch is made entirely in The United Kingdom by us and is not sold by any other company.
There are many variations of run length available to suit your budget and available space. Please contact us if you have any bespoke requirements as we are able to accommodate this during the construction stage.
This is a superior quality and well-constructed hutch offering almost 19 cubic feet of living space and 34 cubic feet of run space.
The hutch is illustrated in pressure treated green and shows a floor liner which we can supply if requested at an additional cost.
Total height from ground to rabbit hutch roof top is 1370mm (54″).
Dimensions (approx).
Rabbit Hutch Roof
H 200mm (9″)
Rabbit Hutch
H 535mm (21″)
D 814mm (32″)
W 1220mm (48″)
Rabbit Hutch Run
H 610mm (24″)
W 814mm (32″)
L 2440mm (96″)
| Internal Hutch Dimensions | 2440 × 814 × 1370 mm |
|---|---|
| Rabbit Breed | British English Giant, Continental Giant, Dutch Rabbit, English Lop, Flemish Giant, Holland Lop, Lionhead, Mini-Rex, Netherland Dwarf, Polish Rabbit |
We do not use couriers to deliver our products as we believe in a total service from construction to meeting our customers face to face. There is a delivery charge from £24.95 per total order whether your order is 1 or 100 items (applies to UK mainland only – certain areas will incur an additional fee). This payment includes assembly and a final silicone treatment after your product is completed, for additional protection against the elements.
Please note the optional tantalizing process may delay your expected delivery date.
| Part | Details |
|---|---|
| Roof/Hutch Clad | Swedish Redwood |
| Run/Frames | Swedish/Russian Redwood |
| Plywood Bases & Doors | Exterior grade |
| Nails | Galvanized |
| Screws | Zinc plated/Black Japan |
| Preservative | Teak water based (non toxic) |
| Hinges/Turn buttons | Black Japan |
For maximum protection, we can tanalise your product (a form of pressure treatment) to help give you up to 10 years without the worry from dry rot and normal decay typical to all outdoor wooden furniture. Click here to find out more.
All our products are finished with a Teak water based (non toxic) preservative. The timber should be re-coated with an equivalent preservative every year to ensure the maximum life span of the product.
Oil based coatings are the best as they tend to repel water before it penetrates the timber fibers.
Re-coating is best undertaken on a warm dry day or even better after a dry spell when the timber has had time to dry enough to absorb the coating you are applying.
Here’s a bit of a tip – get yourself an atomizer spray!
Get yourself an atomizer spray – the sort you do your indoor plant leaves with. Most DIY shops sell what’s called a waterproofing agent. Thompson’s Water seal is a brand name but “B&Q” do their own brand.
Fill the atomizer with it and spray over the external surfaces of the product a couple of times a year. It’s really quick and easy. Don’t forget to wear appropriate mask and gloves. Follow the Health and safety instructions on the container.
