6ft British Giant XL Rabbit Hutch + Downstairs 6ft Run

6ft Giant Rabbit Hutch and Run made for the larger breeds. This is a superior quality outdoor hutch offering lots of space and head height. Handmade in the UK.

£615.68

Treatment Options *

Treatment Options (what are these?)

Optional Extras

Product Add-Ons (what are these?). Please indicate the amount of each item you would wish to purchase by entering a number into the entry field. Please note, you can leave each entry field as blank if you do not require any add-ons.

Product Description

This rabbit hutch for 2 rabbits with run is illustrated in pressure treated green preservative, with the Winter Centre Panel as an optional extra.

Key Features

  • Outdoor rabbit hutch for 2 rabbits with run
  • RSPCA, PDSA and RWAF recommended size
  • 77.5 cubic feet of living space
  • Gable roof with waterproof membrane
  • Removable internal dividers
  • Removable roof for cleaning
  • Predator safe rabbit hutch
  • Lockable bolt locks + latches as standard
  • Hand built in the UK
  • Fully assembled rabbit hutch delivery service
  • Also suitable as an indoor rabbit hutch

Dimensions (approx.)

  • Hutch:
  • H 685mm (27″)
  • W 1830mm (72″)
  • D 635mm (25″)
  • Run:
  • H 610mm (24”)
  • W 1830mm (72”)
  • L 1830mm (72”)

For larger breeds such as French Lops – British Giant – Flemish Giant etc… This 6ft rabbit hutch for 2 rabbits with run is made from Redwood and has an exterior graded hardwood ply base panel. 

Includes a waterproof rabbit hutch roof with insulation for the outdoors

For larger breeds such as French Lops – British Giant – Flemish Giant etc…This 6ft large hutch is made from Redwood and has an exterior graded hardwood ply base panel.

The roof is boarded with the same shiplap as the hutch and is constructed on the same principle as the traditional roof on a domestic house. Beneath the boarding is a waterproof breathable membrane to ensure a watertight construction. The roof also has a 3” (75mm) overhang to all sides.

We only use 1st class materials for an unbeatable build quality

The hutch is constructed from Swedish Redwood and is cladded on the outside with 12mm shiplap. The door frame is made out of a substantial 34mm x 46mm section and comes with two solids boarded doors at each end and an open central wired section in the center. The left hand end of the hutch is designated as the sleeping area and there is an internal divider that can easily be removed in seconds to allow you to clean the entire hutch throughout.

Locks included for extra security

On the right hand side there is a pop hole created in the floor of the hutch to allow your pet to access the attached run below. The run measures 6ft long by 6ft wide by 24” high. The run is screwed permanently to the underside of the hutch.

The run has three foldable lids panels which are also removable as a set. The lids are held in place with toggle clamps which are a quick release mechanism.

The hutch doors come with a black tower bolt as well as a turn button for added security. The tower bolts are a standard feature on all solid doors but can be upgraded to padlock bolts for a nominal charge.

This hutch is made entirely in The United Kingdom by us and is not sold by any other company in the UK.

The hutch is illustrated in Tanalised brown

We can accommodate bespoke requirements to your hutch

This is a superior quality and well-constructed hutch offering 26 cubic feet of living space and 69 cubic feet of outdoor space..


Add-On Options

Sliding Door Kit can be fitted to the upper floor so as to block off access to the ramp. E.g. when closed you can confine you bunny upstairs or downstairs.

A Hinged Rabbit Hutch Roof Kit can be added at the rear so that it will open and close like a lid. It has a bonnet like stay to keep it up, and a hasp and staple at the front so you can lock the rabbit hutch roof closed!

Winter Proofing Panels can be fitted to cover any wire mesh opening for additional winter rabbit care. The panels simply clip on to help keep your bunny warm in winter, creating an excellent winter rabbit hutch. The panels provide extra warmth of a night and also maximum security from predators.

A Central Door Conversion Kit can convert any central fixed wire panel to a wire door. Although you can reach into this area through either of the end doors, the additional kit will allow fuller access to the middle area of the hutch.

Padlock Compatible Lock Upgrade. All solid doors have a tower bolt fitted. However you can have this bolt upgraded to a lockable version which will accommodate a padlock.

Optional PVC Coated Mesh Flooring Panels can be added to the underside of the rabbit hutch run for additional predator protection when placed on grass surfaces. The panels are simply laid on the floor and the weight of the hutch and run combo keeps the panels in place. The panels are made up from 2″ PVC coated wire mesh, so they are kind on the bunnies feet! You will need two panels for this hutch.

Additional information

Internal Hutch Dimensions 1830 × 635 × 685 mm
Rabbit Breed

, , , , , , , , ,

We do not use couriers to deliver our products as we believe in a total service from construction to meeting our customers face to face. There is a delivery charge from £24.95 per total order whether your order is 1 or 100 items (applies to UK mainland only – certain areas will incur an additional fee). This payment includes assembly and a final silicone treatment after your product is completed, for additional protection against the elements.

Please note the optional tantalizing process may delay your expected delivery date.

Materials


Part Details
Roof/Hutch Clad Swedish Redwood
Run/Frames Swedish/Russian Redwood
Plywood Bases & Doors Exterior grade
Nails Galvanized
Screws Zinc plated/Black Japan
Preservative Teak water based (non toxic)
Hinges/Turn buttons Black Japan

Pressure Treatment Options

For maximum protection, we can tanalise your product (a form of pressure treatment) to help give you up to 10 years without the worry from dry rot and normal decay typical to all outdoor wooden furniture. Click here to find out more.

Maintenance

All our products are finished with a Teak water based (non toxic) preservative. The timber should be re-coated with an equivalent preservative every year to ensure the maximum life span of the product.

Oil based coatings are the best as they tend to repel water before it penetrates the timber fibers.

Re-coating is best undertaken on a warm dry day or even better after a dry spell when the timber has had time to dry enough to absorb the coating you are applying.

Additional Protection

Here’s a bit of a tip – get yourself an atomizer spray!

Get yourself an atomizer spray – the sort you do your indoor plant leaves with. Most DIY shops sell what’s called a waterproofing agent. Thompson’s Water seal is a brand name but “B&Q” do their own brand.

Fill the atomizer with it and spray over the external surfaces of the product a couple of times a year. It’s really quick and easy. Don’t forget to wear appropriate mask and gloves. Follow the Health and safety instructions on the container.