Round The Tree Feeding Table

We specialise in bespoke bird table designs – we can make any bird table to your own design. Just ask!


Treatment Options *

Treatment Options (what are these?)


Product Description

A quality bird table that is unique in design. Not available in any stores or online shops. Made in the UK.

Made to customer specifications and to suit dimensions of the tree trunk.
The timber is artistically singe burnt to highlight the grain and every component is individually dipped in a Timbertex preservative before assembly.

The bird table is hexagonal in shape and is supported with four timber brackets which offer to enhance the decorative features of this product.
Made from Scandinavian redwood and 18mm thick exterior plywood table.

Dimensions (approx).
As illustrations
Table (across sides)
760mm (30”)
Table (across points)
860mm (34”)
Tree radius
740mm (29”)


Roof/Hutch CladSwedish Redwood
Run/FramesSwedish/Russian Redwood
Plywood Bases & DoorsExterior grade
ScrewsZinc plated/Black Japan
PreservativeTeak water based (non toxic)
Hinges/Turn buttonsBlack Japan

Pressure Treatment Options

For maximum protection, we can tanalise your product (a form of pressure treatment) to help give you up to 10 years without the worry from dry rot and normal decay typical to all outdoor wooden furniture. Click here to find out more.


All our products are finished with a Teak water based (non toxic) preservative. The timber should be re-coated with an equivalent preservative every year to ensure the maximum life span of the product.

Oil based coatings are the best as they tend to repel water before it penetrates the timber fibers.

Re-coating is best undertaken on a warm dry day or even better after a dry spell when the timber has had time to dry enough to absorb the coating you are applying.

Additional Protection

Here’s a bit of a tip – get yourself an atomizer spray!

Get yourself an atomizer spray – the sort you do your indoor plant leaves with. Most DIY shops sell what’s called a waterproofing agent. Thompson’s Water seal is a brand name but “B&Q” do their own brand.

Fill the atomizer with it and spray over the external surfaces of the product a couple of times a year. It’s really quick and easy. Don’t forget to wear appropriate mask and gloves. Follow the Health and safety instructions on the container.