For larger breeds such as French Lops – British Giant – Flemish Giant etc…This 6ft large two storey hutch is made from Redwood and has two exterior graded hardwood ply base panels.
The roof is boarded with the same shiplap as the hutch and is constructed on the same principle as the traditional roof on a domestic house. Beneath the boarding is a polypropylene twin skin rigid membrane with an air gap to ensure extra warmth and a watertight construction. The air gap provides an insulating barrier inside the hutch to help prevent heat loss. We are the only company to provide this level of insulation as an integral part of our product. The roof also has a 3” (75mm) overhang to all sides.
We only use 1st class materials for an unbeatable build quality
The hutch is constructed from Swedish Redwood and is cladded on the outside with 12mm shiplap. The door frames are made out of a substantial 34mm x 46mm section and come with two solids boarded doors on the left and two wire doors on the right.
A winter rabbit hutch design for maximum winter protection
All the wire aspects of this hutch are covered with removable winter panels. This is the ultimate hutch in terms of both light and security. It is entirely Predator safe rabbit hutch and offers the maximum wellbeing to your pet when the panels are fitted. It is the absolute in best of both worlds in allowing light into the hutch but also offering the maximum security to the upper and lower levels of the hutch especially through the night with the winter panels fitted. The left hand end of the top hutch is designated as the sleeping area and there is an internal divider that can easily be removed in seconds to allow you to clean the entire hutch throughout.
Locks included for extra security
The hutch has the added feature of having two additional doors in the centre of the door frame. These replace the fixed wire panel and provided access easily to all areas of the hutch on both levels. The hutch’s solid doors come with black tower bolts and spring loaded catches on the wire door as well as a turn button for added security. The tower bolts are a standard feature on all solid doors but can be upgraded to padlock bolts for a nominal charge.
The hutch will come on 6” (150mm) legs as standard.
This hutch is made entirely in The United Kingdom by us and is not sold by any other company in the UK.
We can accommodate bespoke requirements to your hutch
There are many variations of this hutch on the website to suit your budget and available space such as with a run on the rear or on top of a run too. The size of run can vary to your preference in terms of length. Please contact us if you have any bespoke requirements as we are able to accommodate this during the construction stage.
This is a superior quality and well-constructed hutch offering 47 cubic feet of living space.
Looking for a different size? Check out our complete range here!
A Sliding Door Kit can be fitted to the upper floor so as to block off access to the ramp. E.g. when closed you can confine you bunny upstairs or downstairs.
A Hinged Rabbit Hutch Roof Kit can be added at the rear so that it will open and close like a lid. It has a bonnet like stay to keep it up, and a hasp and staple at the front so you can lock the rabbit hutch roof closed!
Padlock Compatible Lock Upgrade. All solid doors have a tower bolt fitted. However you can have this bolt upgraded to a lockable version which will accommodate a padlock.