2.75ft Twin Hutch + 8ft Downstairs Run

We specialise in bespoke rabbit hutch designs – we can make any hutch to your own design with a run any length you want. Just ask!

£545.50

Treatment Options * 

Treatment Options (what are these?)

Product Description

We can upgrade the rabbit hutch run to any length you want. Just ask!
Made from Swedish Redwood and exterior graded ply. Comprises of five independent wooden sections which fit together. The rabbit hutch roofs are removable to avail easier access to the rabbit hutches for cleaning. They can be also be screwed down if preferred. Includes ladders to the run and doorway at each end of the run for access to the lawn area.
Ideal for small rabbits or guinea pigs whose pet owners wish to have them in separate living and grazing accommodation. Both rabbit hutches have access to the same rabbit hutch run but a single wire divider panel separates the rabbit hutch run into two parts.  (See but can’t touch)
The rabbit hutch run gives adequate room for your pets to stretch their legs.

Options you can choose
A sliding door that can be fitted into the base that shuts off the rabbit hutch from the ramp. There is a nominal charge for this of £7.50. Just ask!
The rabbit hutch roofs can be hinged at one side if you would like this. Includes 2 hasps and staples so as the rabbit hutch roofs can be locked down. It is only £9.95 per rabbit hutch roof. Just ask!
A shelter can be placed in the rabbit hutch run so as to provide a safe area for your pet to hide if it is startled. Normally £34.95 but is reduced to £27.95 if purchased with your rabbit hutch. Just ask!

Total height from ground to rabbit hutch roof top is 1090mm (43″).

Dimensions (approx)
Rabbit Hutch Roof
H 200mm (9″)
rabbit hutches  (x2)
H 413mm (16″)
W 814mm (32″)
D 613mm (24″)
Rabbit Hutch Run
H 460mm (18″)
W 814mm (32″)
L 2440mm (96″)

Materials


Part Details
Roof/Hutch Clad Swedish Redwood
Run/Frames Swedish/Russian Redwood
Plywood Bases & Doors Exterior grade
Nails Galvanized
Screws Zinc plated/Black Japan
Preservative Teak water based (non toxic)
Hinges/Turn buttons Black Japan

Pressure Treatment Options

For maximum protection, we can tanalise your product (a form of pressure treatment) to help give you up to 10 years without the worry from dry rot and normal decay typical to all outdoor wooden furniture. Click here to find out more.

Maintenance

All our products are finished with a Teak water based (non toxic) preservative. The timber should be re-coated with an equivalent preservative every year to ensure the maximum life span of the product.

Oil based coatings are the best as they tend to repel water before it penetrates the timber fibers.

Re-coating is best undertaken on a warm dry day or even better after a dry spell when the timber has had time to dry enough to absorb the coating you are applying.

Additional Protection

Here’s a bit of a tip – get yourself an atomizer spray!

Get yourself an atomizer spray – the sort you do your indoor plant leaves with. Most DIY shops sell what’s called a waterproofing agent. Thompson’s Water seal is a brand name but “B&Q” do their own brand.

Fill the atomizer with it and spray over the external surfaces of the product a couple of times a year. It’s really quick and easy. Don’t forget to wear appropriate mask and gloves. Follow the Health and safety instructions on the container.

We do not use couriers to deliver our products as we believe in a total service from construction to meeting our customers face to face. There is a delivery charge of £18.50 per total order whether your order is 1 or 100 items (applies to UK mainland only – certain areas will incur an additional fee). This payment includes assembly and a final silicone treatment after your product is completed, for additional protection against the elements.

Please note the optional tantalizing process may delay your expected delivery date.